• veroxii@aussie.zone
    link
    fedilink
    arrow-up
    58
    ·
    1 year ago

    That it falls short during cold winter days is telling me we could probably solve that by not building Australian houses like tents with no doors.

    Proper building codes with proper insulation standards would probably reduce winter demand from residential homes by a huge chunk.

  • Aurenkin@sh.itjust.works
    link
    fedilink
    arrow-up
    47
    arrow-down
    1
    ·
    1 year ago

    Yeah that’s kinda cool I guess but like…what about paying a bunch of money to keep obsolete coal plants open instead?

  • fiah@discuss.tchncs.de
    link
    fedilink
    arrow-up
    14
    ·
    1 year ago

    just a few hours of battery storage is still a huge amount of storage. Are plans being made to tie BEVs into this on a national scale? I figure that’s the most effective way to get closer to this goal

    • Edgelord_Of_Tomorrow@lemmy.world
      link
      fedilink
      arrow-up
      14
      ·
      edit-2
      1 year ago

      Check this out: https://raygen.com/projects/raygen-power-plant#resources

      Batteries were a stopgap until we worked out something better. This plant gets 70% efficiency and more than enough energy storage by refrigerating a cold block, then using stored waste heat + the cold block to create a temperature differential, creating steam (in a closed loop, don’t need a big water supply) to spin a turbine that generates power when the sun goes down. Absolutely genius, already deployed and operating and yet nobody is talking about it.

        • Edgelord_Of_Tomorrow@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Efficiency. You’re collecting 70% (potentially 80%) of the available energy. The best PV is below 30% and the best molten salts are 35% max.

          • IndefiniteBen@feddit.nl
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            I thought molten salt storage gets like 90% efficiency. What’s the advantage of storing energy by cooling blocks?

          • palitu@aussie.zone
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            I could not see where the 70% comes from, apart from the round trip efficiency of the heat capture. I dont know if that is what you are referring to. Do they have a input v output energy comparison somewhere?

      • palitu@aussie.zone
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        i haven’t read about your link yet, but as for storage, the study states

        82% of demand was directly powered by wind and solar without having to pass through storage or be curtailed

        so the majority of the energy is used without being stored, and having the round trip losses.

        … now back to reading ray-gen

    • vividspecter@lemm.eeOP
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      1 year ago

      Are plans being made to tie BEVs into this on a national scale?

      Not much yet from the government itself, but it’s a known opportunity. Smarter grids and changes in utility behaviour (demand response, i.e. shifting demand to when power is cheapest and most abundant) would help a lot, and vehicle and house batteries would contribute to that.

      Although I’ll add that part of the point of the article is that even with zero storage you don’t need much fossil supply, and that just supplying a large amount of wind and solar can massively cut our electricity emissions. Whereas focusing on the challenges of the last 1-2% too much can get us bogged down in the longer term problems, when we can address the immediate issue today. That doesn’t mean that the longer term problems should be ignored, of course.

      • palitu@aussie.zone
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        yeah, I think that is what i like about it. it show a ‘realistic’ renewables input, and looks at what you need from a storage and “other” to maintain the grid. then scores the renewable as a percentage.

      • zurohki@aussie.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I’ve heard a lot about how the grid can use my vehicle’s battery for storage and how this will be hugely beneficial for the grid. However, I’ve never heard anyone explain why I would want to participate.

        The grid gets valuable energy storage, adds a bunch of wear to the battery I had to pay for, and I get…?

        Demand management is much easier to make a case for and probably much simpler to implement. I get cheaper electricity on my EV charging circuit but the power company gets to turn it on and off. The grid gets demand management, I get cheaper power. I’ll still be charged the next day, I don’t care that my car was turned off for a couple of hours.

    • blackrox1411@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      The plan is in progress, from the private sector. I’m currently one of two private non trial household in the country currently who can actually do this at the moment. No one else will be able to for a few more years. But hopefully when new tech and new standards come out, it will be much more wide spread, there is definitely demand for it, especially with rising electricity prices

      • No1@aussie.zone
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Can you share any details? Eg, what car, other bits and pieces, your impressions so far?

        • 18107@aussie.zone
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          We have 2 compatible cars. A 2018 Nissan Leaf ZE1 e+ with 62kWh battery, and a 2014 Nissan Leaf ZE0 with 24kWh battery (both Japanese imports). These are total battery sizes, so the usable capacity is lower. The ZE1 seems to be about 50kWh usable, and the ZE0 about 16kWh.

          The V2G charger we got is the Wallbox Quasar. It reached end of production in July 2022, and was first approved for use in South Australia in December 2022, 6 months after production ended. I had been contacting everyone I could find to get one, and I was very surprised when JetCharge got back to me a few months later asking if I still wanted one. It took a few weeks to sort out paperwork and logistics, and about a day to install. The unit was about $10,000 and the installation about $5,000 for a total of $15,000.

          The Quasar does what it says on the box, but I now understand why Wallbox decided to end production in favour of a new (as yet unfinished) model. The Quasar 1 does not support V2H (at least not well). It has a minimum charge/discharge rate of 6A (1.4kW) so a separate house battery is needed to fill the gap if the house is using less than 1.4kW and you don’t want to import or export power to the grid.
          It also doesn’t have the ability to run during a grid outage. We have a house battery with off-grid capabilities, but we can’t legally have the Quasar on the backup circuits because of its ability to overload the house battery. (The same reason the AC and stove are not on the backup circuits).
          Both of these issues will likely be fixed on the Quasar 2. The Quasar 2 will be released first as a CCS only model (not compatible with the Leaf), and a CHAdeMO version might be released a year or 2 later, but Wallbox has not confirmed anything yet.

          So far I’m happy with the system. It’s definitely not for everyone, and needs constant attention to get any benefit from it.
          We are currently getting wholesale electricity prices from Amber. Most days we roughly break even on cost, but occasionally the prices spike from 20c/kWh to over $10/kWh. This only happens once or twice a month, but we make more in those days than we pay for the entire month for electricity.
          The house battery (10kWh) can export for up to 2 hours, and the car (50kWh) can theoretically export for 10 hours. In practice, the car won’t export below 20% (I’m assuming this is a limit in the car, not the Quasar), and it often isn’t charged above 80%. This still leaves 30kWh which can last for up to 6 hours at maximum export rate. This is more than enough to cover any possible price spikes, and run the house overnight. The price spikes rarely last more than an hour.

          Amber provides some automation for the house battery - importing when prices are low, and exporting when prices are high. They are looking into providing a similar type of automation for V2G. Having to manually set the V2G charger to export during high prices is a nuisance, and without the price push notifications from Amber, we would miss many opportunities to sell to the grid.

          The Wallbox app is designed for all Wallbox chargers, and the V2G features seem to have been added as an afterthought. I have encountered several bugs so far, and several design decisions that I don’t agree with. Schedules can be set in the app for charging and discharging, but there are bugs with this too. I’m hoping that most of these issues will be fixed before V2G becomes mainstream.

          We have a unique situation here. A house with 10kW of solar, a V2G compatible car that’s home most of the time, a house battery, and wholesale electricity prices. V2G works really well for us, and I regret nothing. Without these things however, V2G probably wouldn’t be worth the current upfront cost.

          • No1@aussie.zone
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Thanks, that was a great read, and very informative.

            Glad it’s working out for you!

    • palitu@aussie.zone
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      This simulation used 24GW/120GWh (five hours at average demand) and achieved 98.8% renewable supply at a cost of $95/MWh, including the cost of additional transmission, storage and curtailment.

      so they used a large number for storage. However, there is 7GW/33GWh of existing, under construction or financed BESS projects, and according to the study, 10GW/40GWh of storage will allow for 94% renewables, which is pretty bloody good.

      But yeah, it would be interesting to see BEV’s assisting.