- cross-posted to:
- news@lemmy.world
- cross-posted to:
- news@lemmy.world
Owners say they are noticing orange stains on the stainless steel panels of their new Cybertrucks.
You must log in or register to comment.
Others are in favor of their Cybertrucks developing orange stains, saying that they’re looking forward to the patina the stainless steel may develop.
LOL - that’s some straight up 🤡 shit.
High on copeium.
When does the Cybertruck: limited COR-TEN® Steel edition come out?
After the Cybertruck aluminum and cardboard edition. For that derelique fashion
Hey Cybertruck, you can derelique my balls!
I fucking love patina on vehicles so much. This is definitely clown shit but point me towards a vehicle with copper panels and you can take all my money.
Ooh, that sounds hot as hell.
Make it yourself!
Maybe rivet pennies like scalemail on an existing car
In particular, oil and acidic soiling, such as tar or bird droppings, should be cleaned immediately with an alcohol-based solvent. Immediately afterwards, rinsing with clear water or a pH-adjusted soap is recommended. This type of cleaning should be necessary after every longer ride.
Nah.
Next thing it’ll demand you feed it nuclear pellets
Anyone who’s worked with stainless could have told you that would happen 🤷
To be fair, a patina of rust will make it easier to imagine oneself as some kind of grimdark postapocalyptic warlord or something.
From Tesla’s owners manual, referenced in the article:
Immediately remove corrosive substances (such as grease, oil, tree resin, dead insects…
I find it really funny that the folks at Tesla consider grease to be “corrosive”.
About the same level of quality as their software, it seems.
Never buy the first version of anything, especially something from musk.
Never buy
the first version ofanything,especially somethingfrom musk.
but it’s rusting because of the owners doing shit, or it is a design problem?
Stainless steel, by definition, shouldn’t rust. This has nothing to do with the owners.
Stainless steel is resistant to a certain degree of corrosion depending on the specific type of steel. If Tesla went with a steel that’s resistant enough to handle rainwater but not resistant enough to handle salted roads or salty maritime air then their cars can rust even if they’re made with genuine stainless steel.
Of course that still means they chose the wrong steel.
Stainless steel rusts easily, especially in the presence of salt. It’s stain less, not rust proof.
It was in rain for 2 days. It shouldn’t rust after only 2 days.
Rain, maybe some left over road salt, sand, and constant vibration and abrasion… It’s gonna rust. Maybe not a lot, but it will.
Not after 2 days. High grade stainless steel, which these trucks are obviously not using, will take a lot longer than that even with abuse. That’s the entire point of stainless steel.
It’ll still rust dude, it’s only a matter of time depending on grade.
There is no such thing as rust proof steel, just steel that takes longer to rust in perfect conditions….
Do you know why stainless steel is not used in sea ships?
Do you know that 316 grade stainless steel exists, and that sea water has nothing to do with a truck that was rained on for 2 days? Seriously, bringing up irrelevant shit does not make your argument better…
that is incorrect: https://en.wikipedia.org/wiki/Stainless_steel
Stainless steel, also known as inox, corrosion-resistant steel (CRES) and rustless steel
Don’t give me that bullshit. If a kitchen sink that sees water every day doesn’t rust, neither should a $100K+ truck.
known as rustless steel
Corrosion resistance Although stainless steel does rust, this only affects the outer few layers of atoms, its chromium content shielding deeper layers from oxidation.
If they had picked the correct grade of stainless steel, it wouldn’t rust just by being outside. Cheaper grades rust, higher grades don’t.
Put something rusty in contact with that sink for a little while and get back to us.
I have. I scrubbed the rust off with steel wool. As long as you don’t leave rusted iron against stainless steel for years, it’s fine. And that’s not what’s happening here.
So… you’ve experienced stainless rusting first hand and yet claim it doesn’t rust…?
Stainless rusts, fucking hell lmfao.
It doesn’t matter that it’s not what’s happening, it rusts. It’s that simple, any imperfection from salt or iron oxide (from rocks in asphalt) is a place for rust to start.
The stainless steel didn’t rust. The cast iron pan was accidentally left on the corner of the sink for a weekend with a little water under it. The rust wiped off very easily, because it was transfered from the iron into it, which is all that’s happening as long as it’s not left there for a significant amount of time.
The truck was driven in rain, with no snow or salt involved, and began rusting after 2 days. That’s a low grade of stainless steel to rust that fast.
Your kitchen sink isn’t exposed to the elements like a vehicle is. You ever seen stainless industrial sinks? They don’t always look so great after 10-20 years of abuse.
If these trucks are exposed to salt on the roads during winter weather they probably won’t fair well. Even stainless steel is prone to corrosion and ought to be painted or plated.
You’re comparing 10 years of rough abuse with metal being thrown into them constantly as well as all the acids and salts used in cooking against a year of just existing outside.
Edit: it’s not even a year outside…it was 2 days.
One Cybertruck Owners Club forum member says they started noticing small orange flecks appearing on his truck after driving it in the rain for just two days.
Do the ions from the salts form acids that react with the metal?
If I understand correctly (and I hope I do with a degree in chemistry), it’s moreso the long periods of exposure to wet environments. If those environments also include frequent exposure to salt it expediates the transfer of electrons to the outer surface of the stainless steel and causes oxidation.
Oxidation/rust/petina isn’t a bad thing. A thin outer layer of rust is sometimes used as an aesthetic preservative in architecture though. There are buildings that have heavy surface rust on them intentionally.
Probably not what you’d expect or desire on a vehicle, but very much possible. I wonder how the DeLorean DMC-12 held up in nasty conditions?
Uh… they’re Stainless not Rust-less, duh.
Maybe it’s stain less… it stains less, but it still stains.
So, stain “less”, not stain “proof”
For a couple years I worked at a company that mainly sold fasteners. Think nuts and bolts for residential, commercial and industrial use. They came in different grades (strength), materials and coatings based on usage (for example indoor or outdoor use).
I was told by other sales associates that “stain less” was more accurate than “stainless.” The reason being that if you expose stainless steel to water long enough, it will rust. However, it will take significantly longer to stain/rust compared to plain steel.
You want to use stainless steel in places where things will come into contact with water but not in situations where it will be submerged in water or exposed to the elements for long periods of time.
Your joke was pretty much how I was taught about stainless fasteners.
Sadly, no amount of money can teach a billionaire such simple things.
