For those of you in the UK, IKEA currently has a steep discount on their GU10 bulbs. I’ve just picked up several dimmable, colour temperature controlled bulbs for £5 each.

They play nicely with HA via a sonoff dongle and ZigBee2MQTT, even down to firmware updates.

  • cynar@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    8
    ·
    11 months ago

    They definitely are repeaters. I had issues with a Moe’s ZigBee dimmer. It turned out it was relaying off of an IKEA bulb. When that lamp got turned off at the switch, it killed the link. I ended up using a smart plug as a repeater.

    • LifeBandit666@feddit.uk
      link
      fedilink
      English
      arrow-up
      7
      ·
      10 months ago

      I second this statement. Most of my bulbs are IKEA. I have 4 floors and my ZigBee dongle is on the ground. If they weren’t repeaters, my Aqara motion sensors wouldn’t be working, but they do!

    • RandomLegend [He/Him]@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      1
      ·
      edit-2
      10 months ago

      Interesting… are you using Zigbee2MQTT? Because i am on ZHA and looking at my network visualization none of my aqara devices connect to the IKEA bulbs. Only other IKEA bulbs connect to them in my case.

      I have some temperature sensors from aqara, some movement sensors and some multi buttons and they didn’t connect to them. I had to buy some smart-plugs to act as repeaters.

      • cynar@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        Z2M, and it was definitely routing via the bulb. The ZigBee dimmer unit couldn’t reach the coordinator directly (I might have mounted it in a metal wall box, with a metal front plate). It was connecting to the bulb and working fine however. When the bulb was off, the dimmer completely lost connectivity.

        It might only be some of their bulbs, but they can definitely act as repeaters.

        • RandomLegend [He/Him]@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          Interesting.

          I remember having constant disconnects with my several aqara devices when i only had a path of bulbs to connect to. Those bulbs have constant power and are not turned off.

          And when checking ZHA visualization i saw that they don’t connect to the bulbs but rather tried to connect directly to my stick but only got minimal connection because of the distance. No matter what i tried, they would not connect to the bulbs