• SupraMario@lemmy.world
      link
      fedilink
      arrow-up
      20
      ·
      8 months ago

      You actually make it to space? I usually just end up creating shitty versions of the V1 with passengers.

      • ChicoSuave@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        8 months ago

        The Kerbal solution is more rockets.

        The actual solution is probably some control surfaces for the atmosphere, reaction wheels for space (both for steering) and upscaling to the biggest rocket available with no more than 2 largest size fuel tanks for each rocket. SRBs are your friend until they aren’t. Stabilizers save more fuel than imagined.

        • SpaceCowboy@lemmy.ca
          link
          fedilink
          arrow-up
          3
          ·
          8 months ago

          I think it’s the thumper booster that I determined to be the cheapest one. So I got over 20 of those, run like six of them at first, when they run out of fuel, dump them and activate four of the others, dump them when they run out, etc. It’s 100% cheap boosters until I get into space.

  • x4740N@lemmy.world
    link
    fedilink
    English
    arrow-up
    36
    arrow-down
    3
    ·
    edit-2
    8 months ago

    This made my dizzy and that doesn’t help with the fact that I discovered you can get nausea and headaches from drinking matcha on an empty stomach an hour ago

    • LazaroFilm@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      12
      ·
      8 months ago

      Yeah. I hesitated posting because of TikTok. But I felt the video explained things in a way I had not seen anywhere else and it was worth it.

  • Kokesh@lemmy.world
    link
    fedilink
    English
    arrow-up
    23
    arrow-down
    2
    ·
    edit-2
    8 months ago

    You could see how uncontrollable it was even on the stream itself. They have graphics showing the positioning of the ship. Seems like RCS packed it up and decided to go home (burned to crisp)

    • TWeaK@lemm.ee
      link
      fedilink
      English
      arrow-up
      11
      arrow-down
      1
      ·
      8 months ago

      Yeah to me it looked like they didn’t really have any sort of attitude control system (eg RCS thrusters) for while they were in space. As soon as the rocket stopped firing it was spinning, albeit very gently at first.

      I’m more interested in knowing what happened with the booster after it’s boost back burn, where some of the engines seemed to shut off on their own before the rest were cut. This issue is likely also responsible for the failed suicide burn. Also, why they didn’t try the orbital relight of the Starship engines. If the orbital relight was skipped because of orientation issues, then shame on them for not remembering that you can stablise your craft in KSP with just a little bit of vectored rocket burn.

      These are apparently still just flying grain silos, a long way away from the full finished product. However it does seem like they’re at the cusp of having a viable satellite launch vehicle, even if the re-entry stuff is still bugged.

      • NotMyOldRedditName@lemmy.world
        link
        fedilink
        arrow-up
        6
        ·
        edit-2
        8 months ago

        So apparently they can’t use it to launch satellites into orbit until the reentry buggy stuff is solved.

        If they can’t bring it back into the atmosphere in a controlled manner, it’s to big, and designed not to break up, to allow it to reenter anywhere from a failure.

        No one wants raining starship parts over a populated area.

        It won’t matter if it’s expendable, but they gotta be in control of reentry.

        • TWeaK@lemm.ee
          link
          fedilink
          English
          arrow-up
          6
          ·
          8 months ago

          Yeah I still think that’s within their grasp with only minor modifications. Obviously, not testing the engine relight is a big hurdle, but beyond that it’s just about a little bit of attitude control and then they can de-orbit into the ocean as before.

          Actually getting the craft to survive re-entry, and even land and be re-used is a much bigger task, but it wouldn’t take too much to get Starship in the position where it can launch Starlink V2’s.

          • NotMyOldRedditName@lemmy.world
            link
            fedilink
            arrow-up
            3
            ·
            8 months ago

            but it wouldn’t take too much to get Starship in the position where it can launch Starlink V2’s.

            I imagine the first truly orbital launch will have one or two v2 in it.

            It’s gonna be wild once they can start launching the satellites while testing the landing of both vehicles.

      • yogurt@lemm.ee
        link
        fedilink
        arrow-up
        5
        ·
        8 months ago

        KSP doesn’t simulate the fuel floating into a big blob in zero g. irl you need working RCS to create a little g force to push the fuel down to where the engine intakes are before you can try starting them.

        • TWeaK@lemm.ee
          link
          fedilink
          English
          arrow-up
          1
          ·
          8 months ago

          That’s a very good point and quite likely along the lines of what happened. Could be a challenging thing to fix, and may also have implications for orbital fuel transfers.

  • 4am@lemm.ee
    link
    fedilink
    arrow-up
    20
    arrow-down
    7
    ·
    8 months ago

    Good thing they also sped it up by about 4x or we never would have noticed. 🙄

    • LazaroFilm@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      30
      arrow-down
      1
      ·
      8 months ago

      The whole point of this video is to emphasize the rotation of the vehicle. Speeding it up does help with that. You can watch the official feed of you want to watch in real time.

      • Pendulum@lemmy.world
        link
        fedilink
        arrow-up
        13
        ·
        8 months ago

        It’s an excellent video. The realtime feed made it look like everything was great, fully under control. This shows that it really wasn’t near the end, and it’s loss wasn’t truly “unexpected”

  • Shyfer@ttrpg.network
    link
    fedilink
    arrow-up
    11
    ·
    8 months ago

    The Starship video in general is so cool. And I love the stabilizing effect in this one, it really does help.

  • lemmyingly@lemm.ee
    link
    fedilink
    arrow-up
    7
    arrow-down
    1
    ·
    8 months ago

    I wonder how they stabilised the video.

    Rotate the video at a constant rate about a point until the rocket hits turbulence/has a change of direction and then repeat?

    • cygon@lemmy.world
      link
      fedilink
      arrow-up
      24
      ·
      edit-2
      8 months ago

      It’s a standard feature in nearly all common video editors (i.e. DaVinci Resolve or Adobe Premiere).

      Usually, stabilization goes over all video frames and tries to find image transformations (rotation + translation + zoom) that make a frame match as closely as possible with the previous frame. That’s an oversimplified explanation, but from a user point-of-view, these tools are mature enough to be applied with just a few clicks.

      This video is definitely the result of that, as, whoever did it, didn’t even bother to insert a cut when the feed switches between left side and right side camera, thus making the stabilization spazz out momentarily.

      • Turun@feddit.de
        link
        fedilink
        arrow-up
        5
        ·
        8 months ago

        Where do you see the camera switch side? The fin on which the camera is mounted moves every now and then, but I think we only ever see the perspective of one camera.

        • cygon@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          8 months ago

          You’re right, it doesn’t. I could have sworn I saw the opposite fin for a few seconds yesterday, but I must have been mistaken.

    • SanguinePar@lemmy.world
      link
      fedilink
      arrow-up
      12
      ·
      8 months ago

      There used to be a great subreddit for image stabilisations, always enjoyed seeing stuff from there and people would sometimes go into detail about the tools and techniques they used .

      There probably still is, but there used to be too.

    • Contramuffin@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      8 months ago

      Most advanced video compositors/editors have stabilization features. What you do is you give the program a couple of reference points that you know aren’t moving, and the program will automatically track those points over time

  • TWeaK@lemm.ee
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    edit-2
    8 months ago

    This is brilliant! Should be longer though.