Basically what it says in the title. I did a lot of searching in Internet. I think small form factor computers are mt best bet. But I still feel they are costly for my purpose.

I am going to be running some ansible playbooks periodically on the machine. SBCs i looked at either had very high specs for this use case and thus higher price or they had other fratures i dont want like - wifi, graphics card etc.

I am preferring enterprise hardware because this would eventually be used in business where people will not settle for anything less.

  • catloaf@lemm.ee
    link
    fedilink
    English
    arrow-up
    13
    ·
    8 months ago

    You’re going to need to be more specific about your use case, because if you say “enterprise grade” I’m going to say “poweredge”, and those are not at all small.

    • driftWood@infosec.pubOP
      link
      fedilink
      arrow-up
      2
      ·
      8 months ago

      I know. I felt while writing the post that this feels wrong writing those words in same sentence. The scenario is that we would deploy the hardware on customer premises so it has to be supported and very reliable(hence enterprise grade). But i personally think that all enterprise grade hardware is way overkill for running ansible playbooks. So was trying to see if there is an intersection point between these opposite requirements.

      • catloaf@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        ·
        8 months ago

        Maybe “industrial PC” is the category you should be looking at.

  • mosiacmango@lemm.ee
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    8 months ago

    Your use case sounds like something a nuc or sff from minisforum could handle, but if you want “cheap” and “small enterprise,” both ambiguous terms, the supermicro superservers should fit the bill.

  • comador @lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    8 months ago

    You can basically get rack mount level performance from:

    • Supermicro SuperWorkstation Tower Servers
    • Lenovo Thinkstation P Series Server Towers
    • HPE ML series Tower Servers
    • Dell Precision Tower Workstations

    In your situation, I’d be looking at ebay, serversupply, or other used hardware resalers that offer 2 generations back hardware. Used DDR4 based systems are abundant and cheap enough, go that route.

    • driftWood@infosec.pubOP
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      Thanks for these suggestions. Will look into them. Hopefully they are still manufactured and supported by the vendors.

  • Justin@lemmy.jlh.name
    link
    fedilink
    English
    arrow-up
    3
    ·
    8 months ago

    Deployment is probably more important than hardware for enterprise one-off machines.

    Raspberry pis are plenty reliable, though maybe you could opt for something with a case, an N100 and a more reliable SSD, for a similar price.

    • driftWood@infosec.pubOP
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      So this will be deployed for customer sites. I dont think they will be happy with second hand stuff from ebay 😀 For my personal stuff i would have been happy with that though.

  • polygon6121@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    8 months ago

    Two things you need to answer to get any relevant answers. What is the budget and what is your required spec and software stack.

    • driftWood@infosec.pubOP
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      Budget is not an issue actually. This is going to be deployed for customers but i want to it to be as cheap aspossible to get them maximum value for their money. Software stack is going to be minimal. Probably alpine linux or ubuntu server. Spec wise i think even an i3 level cpu is fine. Ram 8gb, hard disk 256 gb ssd should be more than enough. Dont require any fancy wireless stuff like wifi and Bluetooth.

  • RedFox@infosec.pub
    link
    fedilink
    arrow-up
    2
    ·
    8 months ago

    I have a stack of HP Gen 8 servers in the lab that I got off of ebay, for cheap. Cause they’re G8s…and not 10/11 :)

    • driftWood@infosec.pubOP
      link
      fedilink
      arrow-up
      2
      ·
      8 months ago

      I have one in the lab at office. Were abt to be thrown out. Nursed it back to life somehow. Good to play around plus company foots the electricity bill so win-win.

  • BoofStroke@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    8 months ago

    I wouldn’t at home. Enterprise hardware requires enterprise cooling and rack mount systems are loud.

  • Possibly linux@lemmy.zip
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    8 months ago

    Does it need to be replaceable or upgradable?

    I personally used hardware from Pine64 but its not for everyone. You also could go with an Android tablet

    • driftWood@infosec.pubOP
      link
      fedilink
      arrow-up
      1
      ·
      8 months ago

      Not really. Just has to run till at least 5years at least. Since this will be deployed at customer site, pine64 and android both are not feasible. Thanks for the suggestion though.