I have a couple of old laptops lying around and want to throw them away, but have been cautious to do so because of privacy concerns of data still on the hard drives. What is the best way to wipe them? Or should I take them out and physically destroy them?

They are running windows vista and 10 I think.

  • CADmonkey@lemmy.world
    link
    fedilink
    arrow-up
    34
    ·
    11 months ago

    I like to take the hard drive(s) out and either drill holes in them or beat them to pieces with a big hammer.

    Dear old Dad worked in IT, and he had a clearly marked “hard drive eraser”. It was a 20 pound sledgehammer.

    • const_void@lemmy.ml
      link
      fedilink
      arrow-up
      2
      ·
      11 months ago

      Doesn’t that still leave most of the data on it? You don’t even bother erasing the drive first?

      • Fosheze@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        1
        ·
        11 months ago

        It takes far more work to recover data off of smashed platters than Joe the average users data is worth. There’s very few ways to make that data completely nonrecoverable. Even zeroing the drive isn’t 100% safe from someone with the right resources and knowhow. Just smashing the platters makes data recovery enough of a pain that it’s almost never worth it.

        • dgmib@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          11 months ago

          Data on a HDD that’s been overwritten with zeros or random data is unrecoverable with all known current technology.

          In theory it might be possible to recover something with some future tech that hasn’t been invented yet, which is why the DOD standard requires erasing with multiple passes, but there isn’t currently a (publicly known) way of doing it.

          SSDs are a bit tricky because of wear levelling, but usually two full overwrites of a SSD makes it just as unrecoverable.

      • CADmonkey@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        11 months ago

        I don’t see how much data can be recovered from broken, bent pieces. If you’re really concerned, you can use a torch to raise a magnetic platter until it glows, this raises it above it’s curie temperature so all the magnetic particles stop being magnetic.

  • Nibodhika@lemmy.world
    link
    fedilink
    arrow-up
    28
    arrow-down
    1
    ·
    11 months ago

    The easiest options in order of effectiveness, and how to bypass them:

    1. Do nothing.
    2. Reset Windows or erase all files you don’t want to be found. To recover from this you need a specialised piece of software that will recover the files, but not the names or locations, so while the actual data is easily recoverable, the person would need to sieve through most files you’ve had in your PC since forever with no order.
    3. Zero the disk, my way to do this would be to boot a Linux USB and run for example dd if=/dev/zero of=/dev/sda, this will delete EVERYTHING on that disk, including windows, partition table and the bootloader. The way to recover from this involves specific hardware and a sterile lab, unless the authorities are investigating you it’s very unlikely someone will recover from this.
    4. Multiple passes with zeroes and random data, the way I would do this is the same as above but use /dev/urandom for the if parameter, run it multiple times, then run once with zeroes. Theoretically it could be possible for the same lab as before to recover some data if the machine ran out of entropy and didn’t wrote actual random data, and someone could predict the random data and compensate for it on the residual magnetic field, but it’s highly unlikely. Almost no one would be able to recover this, and if someone can they will charge A LOT.
    5. Physical destruction, e.g. drill a hole or smash the disk for an HDD, break the chips for an SSD.

    All of that being said, why throw it away? Why not sell it or use it to self-host something cool like a media centre or a steam machine if the laptop is good enough.

  • amigan@lemmy.dynatron.me
    link
    fedilink
    English
    arrow-up
    24
    ·
    11 months ago

    Laughing at all the Hollywood shit in this thread. A single pass erase (or ATA Secure Erase, if they are SSDs that support the command) is more than enough. Nobody is going to waste time and money recovering data of unknown provenance from a landfill.

    • litchralee@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      11 months ago

      HDDs also support ATA Secure Erase, although it will take a few hours rather than the few minutes it would wirh an SSD.

  • dutchkimble@lemy.lol
    link
    fedilink
    arrow-up
    15
    ·
    11 months ago

    Hammer, then marinate for atleast 30 mins in soya sauce, onion, garlic, herbs, then bbq, eat and poop in 3 different bathrooms across the city. Pro tip, sprinkle with olive oil each side while on the grill.

  • witten@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    edit-2
    11 months ago
    1. There are companies you can pay to physically shred your disk drives. You have to be able to trust them of course for this to work.

    2. Or if you want to DIY, you can drill or smash your drives. Just wear eye protection, etc. Making the drives inoperative like this is the only thing I’d trust, but you can also software-wipe them first.

    • NotSpez@lemm.eeOP
      link
      fedilink
      arrow-up
      5
      ·
      11 months ago

      Great tip on the eye protection! Metal splinters are a nightmare for any future MRI’s one might need.

  • Deestan@lemmy.world
    link
    fedilink
    arrow-up
    11
    ·
    11 months ago

    If you just do the simple one-pass zero-ing out, suggested a few times here, the data is only recoverable in theory. There are labs that do it, but they charge thousands of USD for a drive and giving limited results.

    Unless you are being actively targeted by deep pockets, that’s plenty good enough.

    • Sethayy@sh.itjust.works
      link
      fedilink
      arrow-up
      2
      ·
      11 months ago

      And if you do a couple passes (might take a bit but who cares if youre throwing the whole thing out) then in theory even the nsa can’t get in it

  • oshitwaddup@lemmy.antemeridiem.xyz
    link
    fedilink
    arrow-up
    12
    arrow-down
    1
    ·
    11 months ago

    It depends how badly you need that data to never see the light of day again. Most likely, you’ll be fine to erase the drives with secure erase options (where it writes 0 and then 1 to the whole drive, and back and forth a few times depending on settings), but if you really really need to 100% guarantee there’s absolutely no chance of recovery, then you’ll need to destroy the drives physically

    • NotSpez@lemm.eeOP
      link
      fedilink
      arrow-up
      5
      ·
      11 months ago

      There is nothing extremely sensitive on there, but the more time I spend on lemmy (as a bit of a tech noob) the more I care about privacy

      • oshitwaddup@lemmy.antemeridiem.xyz
        link
        fedilink
        arrow-up
        14
        ·
        11 months ago

        In that case, secure wipe should be more than enough

        also, if you’re getting rid of them, there might be a charity you can donate them to rather than just tossing them. Idk any off the top of my head, but it seems worth looking into

  • someguy3@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    edit-2
    11 months ago

    Geez at the answers in the thread. Boot off a USB drive with Linux, right click the HD, and simply format the drive. Not a quick format, you may have to unselect that. You’ll know because a quick format will take seconds, a full format will take an hour (depending on the size of course).

    Then donate the laptops. Donation place should be able to install Linux. Most people don’t need much laptop.

    • Knusper@feddit.de
      link
      fedilink
      arrow-up
      4
      ·
      11 months ago

      Hmm, what does that full format do? Write zeros over everything?

      Personally, I would run shred on the root filesystem. It’s a tool specifically intended for properly deleting data (overwrites it with random data multiple times).

      • otp@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        11 months ago

        Even writing 0’s takes hours per TB sometimes. Guess it depends on how much time you have

        • Knusper@feddit.de
          link
          fedilink
          arrow-up
          3
          ·
          11 months ago

          It took maybe 10 minutes or so for a 256 GB hard drive for me, if I remember correctly.

          That was an SSD, though, so yeah, mileage would definitely vary on an HDD.

  • DeltaTangoLima@reddrefuge.com
    link
    fedilink
    English
    arrow-up
    9
    ·
    11 months ago

    You’ve said you’re intending to throw these laptops away, so physical destruction is quickest and simplest.

    But, if you’re intending to sell or give these away for someone else to use, zeroing each sector is probably ‘good enough’ for your purpose (as someone else has always said).

    If you really want to make it harder, you can use something like the Boot and Nuke bootable Linux disk for the job, as it also has the option of multiple passes, using zeroing and/or binary random shit for each sector. Just grab the free for personal use version.

  • nomecks@lemmy.world
    link
    fedilink
    arrow-up
    7
    arrow-down
    1
    ·
    11 months ago

    Turn on laptop

    Hold magnet over where the hdd is

    Listen to laptop scream in pain

  • Unrowley@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    11 months ago

    I work at an electronics recycling facility and all laptops that are recycled are completely sanitized and properly disposed of as e-waste. Look around for a local recycling center and check for an R-2 certification, if they have one they will take out any identifiers and do passes on drives via a sanitization device to ensure that the whole thing is completely devoid of all data.

    • Delphia@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      11 months ago

      This is the correct answer. Give it a format just to be sure then donate it to a recycling center.