https://github.com/svaante/dape#
Given that eglot has been part of the core emacs, I believe this is a long lasting wish for a lot of emacsers that has finally been fulfilled. (a stand alone DAP implementation that does not rely on LSP-mode)
You must log in or register to comment.
Author here, if you have any suggestions or bump into any issues please open a ticket. I have some extra free time on my hands a couple of months going forward.
Very excited to see this package! I have not tried it out yet but I just wanted to say thanks for your work on it!
How would you attach a DAP python debugger to a running instance of (i)Python? Is there some import debugpy; debugpy.start() command or similar?
There is
In python:
import debugpy debugpy.listen(5678) # debugpy will open 5678Then add the following configuration to dape
(add-to-list 'dape-configs `(debugpy-attach modes () host "localhost" port ,(lambda () (read-number "Port: ")) :type "debugpy" :request "attach"))Supposedly there is a way to attach by pid with
python3 -m debugpy --listen localhost:5678 --pid 12345, but that failed, both on osx and linux.Yes, I also tried to use
--pidto attach to a python process, and failed too.Did you either succeed with debugpy.listen()? Is that suitable to call interactively then quit (like iPDB)?
I believe this is out of the scope of the DAP protocol, I believe even VSCode cannot do it based on my understanding.
If you want to debug a running session, just use ipdb or pdb.
No it isn’t. DAP can definitely do this. It can even attach to a PID.
This is what I complained about it in my post: I could not get dape to work with this.
I see, thanks for correcting me.
I see that this post https://github.com/Microsoft/vscode-python/issues/1078 suggested that debugpy can already attach to a local Python process.
I see, thanks for correcting me.
I see that this post https://github.com/Microsoft/vscode-python/issues/1078 suggested that debugpy can already attach to a local Python process.
Seems like in-process debuggers like iPDB are far more practical for interactive debugging of long running shells.
Currently Dape does not come with any debug adapter configuration.
I hope there will be a separated package (maybe maintained by another one) for the templates, or a continuously updated wiki so dape will be easier to use.
I saw this on the mailing list, and it looks very promising. It’s always nice to have more choice in this space. I did also play around with it quite a bit and I do have some feedback to the author (and anybody who would want to play around with it):
Expect to debug the dape debugger. I wanted to check it out with a bespoke software project I’m building for a client and I figured this would be a fine way to test it. I’ve never played around with DAP and friends before (ipdb is fine for me, thanks) so it was a bit of a learning curve as the documentation is sparse, even moreso the magic flags and parameters you need to paw off to dape and – down the road – the actual DAP client/server. This… this is bad and needs a lot more handholding. I struggled, and I’ve done Python and Emacs for two decades. And I simply could not, no matter what I did, get the microsoft adapter and dape.el to play nice with the client-server attachment facility in the dape protocol, and dape.el didn’t help me much here in terms of why — nor, for that matter, did the Microsoft-provided DAP debug adapter you use. Error handling in the DAP client/server seems poor or not designed, surprise surprise, for anything but VSCode or whatever.
I could, after a fair bit of wrangling, get it to work by starting the process for me and then have it hook into whatever it needs to do to work. That does seem to work. I never did get attachment to work, rendering it useless in a webapp or even for my usual workflow of throwing down a
breakpoint()and having ipdb (or whatever) pick up from there.Other problems I’ve encountered is a weird way that it stores configuration options once you’ve told dape to connect to stuff. The UX around that needs work before it’s plug-and-play.
The other criticism is that it does not, and this might be a DAP thing and not a dape thing, work with the default GDB-like shorthands (
cfor continue, etc.). Maybe that’s just how it is; but it’s little things like that.Being able to see all the relevant variables, a la the GDB multi-window support in Emacs, is also nice. Which makes me wonder why we can’t just reuse that, as there’s surely man-years of work to make that stable and effective.
Still, an impressive effort, and I’m surprised how little code dape actually is. I’m sure it’ll improve quickly once people start giving feedback.
Expect to debug the dape debugger
Did you use the debugpy adapter with the following configuration from the readme? (add-to-list 'dape-configs `(debugpy modes (python-ts-mode python-mode) command “python3” command-args (“-m” “debugpy.adapter”) :type “executable” :request “launch” :cwd dape-cwd-fn :program dape-find-file-buffer-default))
I have tested this quite often at my day job so I am a bit surprised you bumped into issues. But thats not to say that Dape will contain warts until there is enough feedback and testing. It would be great if you could dump the contents of the dape-debug buffer into an issue on github!
DAP has some issues as well, extremely loose specification, the overwhelming majority is tested with vscode and a lot of cruff is hidden inside in the plugins for vscode. I was close to putting it in the bin at several points.
Other problems I’ve encountered is a weird way that it stores configuration options once you’ve told dape to connect to stuff. The UX around that needs work before it’s plug-and-play.
Usability feedback is appreciated, the dape command tries to do a lot of stuff, maybe to much.
It models the way one would use a command line tool. For example if we run dape debugpy it executes the configuration above with all of the plist entries as the default command line arguments. If we want to overwrite any “argument” or add an “argument”, lets say we wanted to run the python file with some enviroment variable then call dape with debugpy :env (:ENV “MY_ENV”).
The other part is actually evaluating all of the symbols and functions in the config and adds the result into history for ease of access.
Being able to see all the relevant variables, a la the GDB multi-window support in Emacs, is also nice. Which makes me wonder why we can’t just reuse that, as there’s surely man-years of work to make that stable and effective.
I am regretting not looking into this when I started, even though I kinda like having one “big” buffer with all of the information, using the tried and true GUD interface would meld better with one of the goals of package of being closer to emacs. So I am looking into the possibilities.
Still, an impressive effort, and I’m surprised how little code dape actually is. I’m sure it’ll improve quickly once people start giving feedback.
Thank you, it would not have been possible for me to get this far without Wireshark. A little reverse engineering is always fun :) And thanks for your feedback!
Did you use the debugpy adapter with the following configuration from the readme?
Of course.
DAP has some issues as well, extremely loose specification, the overwhelming majority is tested with vscode and a lot of cruff is hidden inside in the plugins for vscode. I was close to putting it in the bin at several points.
Yes, indeed.
I just tried the example configuration (for python) from github and the dap works perfectly fine to me, everything works as expected except the only one thing: post-run cleanup.
I do notice that there are some leak problems: the debugpy process will not exit even when the debug session terminated, keeping high CPU usage even after emacs exits.
It is a tricky problem and not easily reproduce, I will try to dive into this problem more to make it as reproducible as possible.
Besides, the go debugger (delve) works perfectly to me with the example configuration.
That’s a very good idea. We’ve moved away from god libraries that do everything like Helm or LSP and I’m here for it. I don’t have anything against those, they are amazing and useful but any time I wanted to modify a small thing in my config or wanted to try another lib, it just wasn’t readily possible and I like having smaller build parts.
That’s not fair regarding LSP imo. It’s an excellent LSP client mode.
There goes my Friday productivity 😎 All the languages I care about are already supported too!
While deliberately not supporting launch.json makes sense the configuration looks quite friendly to adding that functionality separately.
Thank you for working on such a desirable and challenging feature for emacs users who don’t use lsp mode
I am not the author of this plugin😂 just want to share this exciting news with Redditers
Tried using dape recently with Go and managed to get it to debug Go tests. Sharing the snippet incase its helpful for others (requires go treesitter).
(setq treesit-go-tests-query (treesit-query-compile 'go '((function_declaration name: (identifier) @testname parameters: (parameter_list :anchor (parameter_declaration type: (pointer_type) @type :anchor)) (:match "*testing.\\(T\\|M\\)" @type) (:match "^Test.+$" @testname)) @parent))) (defun jake/query-go-test-nodes () (when (treesit-ready-p 'go) (treesit-query-capture (treesit-buffer-root-node) treesit-go-tests-query))) (defun jake/completing-read-go-tests () (let* ((test-matches (jake/query-go-test-nodes)) (test-name-matches (cl-remove-if-not (lambda (match) (eq (car match) 'testname)) test-matches)) (test-names (mapcar (lambda (match) (treesit-node-text (cdr match))) test-name-matches))) (completing-read "Test:" test-names nil t))) (defun jake/dape--select-go-test-args () (when-let* ((test-name (jake/completing-read-go-tests)) (test-regexp (concat "^" test-name "$"))) (if test-name `["-test.run" ,test-regexp] (error "No test selected")))) (defun jake/file-relative-dir () "Return the file directory relative to dape's cwd. This is used by Delve debugger." (concat "./" (file-relative-name default-directory (funcall dape-cwd-fn)))) ;; inside your dape-config (add-to-list 'dape-configs `(test modes (go-mode go-ts-mode) command "dlv" command-cwd dape-cwd-fn command-args ("dap" "--listen" "127.0.0.1:55878") host "127.0.0.1" port 55878 :type "go" :name "debug test" :request "launch" :mode "test" :cwd dape-cwd-fn :program jake/file-relative-dir :args jake/dape--select-go-test-args))(defun go-func-name-at-point ()
(interactive)
(save-excursion
(end-of-line)
(beginning-of-defun)
(when (re-search-forward “^func[[:space:]]+\\([[:alnum:]_]+\\)” nil t)
(match-string 1))))
(setq treesit-go-tests-query
(treesit-query-compile
'go
'((function_declaration
name: (identifier) u/testname
parameters: (parameter_list :anchor (parameter_declaration type: (pointer_type) u/type :anchor))
(:match “*testing.\\(T\\|M\\)” u/type) (:match “^Test.+$” u/testname)) u/parent)))
(defun vmacs-query-go-test-nodes ()
(when (treesit-ready-p 'go)
(treesit-query-capture (treesit-buffer-root-node) treesit-go-tests-query)))
(defvar vmacs-go-tests-hist nil)
(defun vmacs-completing-read-go-tests ()
(let* ((test-matches (vmacs-query-go-test-nodes))
(test-name-matches (cl-remove-if-not (lambda (match) (eq (car match) 'testname)) test-matches))
(test-names (mapcar (lambda (match) (treesit-node-text (cdr match))) test-name-matches)))
(completing-read “Test:” test-names nil t nil vmacs-go-tests-hist (go-func-name-at-point))))
(defun vmacs-dape–select-go-args ()
(if (string-suffix-p “_test.go” (buffer-name))
(when-let* ((test-name (vmacs-completing-read-go-tests))
(test-regexp (concat “^” test-name “$”)))
(if test-name
`[“-test.run” ,test-regexp]
(error “No test selected”)))
(if current-prefix-arg
(vconcat (split-string (read-shell-command "args: " nil
(if (equal (car compile-history) “”)
'(compile-history . 1)
'compile-history))))
[])))
;; https://github.com/go-delve/delve/blob/master/Documentation/usage/dlv_dap.md
(defun vmacs-dape-test-p ()
(if (string-suffix-p “_test.go” (buffer-name))
“test” “debug”))
(defun vmacs-dape-relative-dir ()
“Return the file directory relative to dape’s cwd. This is used by Delve debugger.”
(if (string-suffix-p “_test.go” (buffer-name))
(concat “./” (file-relative-name
default-directory (funcall dape-cwd-fn)))
(funcall dape-cwd-fn)))
;; inside your dape-config
(add-to-list 'dape-configs
`(delve
modes (go-mode go-ts-mode)
command “dlv”
command-cwd dape-cwd-fn
command-args (“dap” “–listen” “127.0.0.1:55878”)
host “127.0.0.1”
port 55878
:type “go”
:name “go-debug”
:request “launch”
:mode vmacs-dape-test-p
:cwd dape-cwd-fn
:program vmacs-dape-relative-dir
:args vmacs-dape–select-go-args))
Compared to gud, it’s a lot of config, it’s also nasty that it looks like you have to code the program path to your config.
but, it’s a great effort in any case, both from you and the plugin author. Configuration snippets like this help a lot of people.
Yes, yes, yes!
(And sorry for the noise)
I till have to find time to test it but glanced through it on Monday, it is pretty awesome to have, this plus eglot is all someone needs imo.
I like right at the top vscode-js-debug is a supported adapter. It’s been a while since vscode-js-debug has worked in dap-mode.
I am now excited to try dape out to see how well it works.