From time to time, often after I’ve restored from sleep or finished playing a Steam game, one of my CPU cores is pinned at 100% with no indication of what might be doing it. Running htop, btop, or GNOME system monitor all show the same thing: CPU0 at 100% while the rest are doing near-nothing, and no process in particular seems to be using those resources.

If I restart, it’s back to normal, and sometimes I can play a game in Steam or let the computer go to sleep and it doesn’t do this, but it happens often enough that’s annoying/confusing so I’d like to know if there’s a way to either (a) diagnose which processes are using which CPU cores, or (b) somehow “reset” the checking of these values to make sure that something’s not just being misreported.

This is a desktop system running Arch & GNOME.

  • Daniel Quinn@lemmy.caOPEnglish
    49·
    5 days ago

    There it is! Thank you! It’s a process owned by root called kworker/0:0+kacpid. Any idea what that is?

    [Edit 1] Interestingly, I can’t even kill -9 it.

    [Edit 2] With kworker kacpid to work with, I did a quick search and found this SO page that has some interesting information that I only partially understand, but the following worked like a charm:

    # grep -Ev "^[ ]*0" /sys/firmware/acpi/interrupts/gpe?? | sort --field-separator=: --key=2 --numeric --reverse | head -1
/sys/firmware/acpi/interrupts/gpe09:11131050     STS enabled      unmasked
# echo disable > /sys/firmware/acpi/interrupts/gpe09

    It’s not clear to me what an interrupt is or whether this gpe09 value is meant to be persistent across reboots, or why this only seems to be happening in the last couple months, but if I can make it go away by running the above from time to time, I guess it’s alright?

    • scrion@lemmy.world
      46·
      4 days ago

      An interrupt is an input that can be triggered to interrupt normal execution. It is used for e. g. hardware devices to signal the processor something has happened that requires timely processing, so that real-time behavior can be achieved (for variable definitions of real-time). Interrupts can also be triggered by software, and this explanation is a gross oversimplification, but that information is what is most likely relevant and interesting for your case at this point.

      The commands you posted will sort the interrupts and output the one with the highest count (via head -1), thereby determining the interrupt that gets triggered the most. It will then disable that interrupt via the user-space interface to the ACPI interrupts.

      One of the goals of ACPI is to provide a kind of general hardware abstraction without knowing the particular details about each and every hardware device. This is facilitated by offering (among other things), general purpose events - GPEs. One of these GPEs is being triggered a lot, and the processing of that interrupt is what causes your CPU spikes.

      The changes you made will not persist after a reboot.

      Since this is handled by kworker, you could try and investigate further via the workqueue tools: https://github.com/torvalds/linux/tree/master/tools/workqueue

      In general, Linux will detect if excessive GPEs are generated (look for the term “GPE storm” in your kernel log) and stop handling the interrupts by switching to polling. If that happens, or if the interrupts are manually disabled, the system might not react to certain events in a timely manner. What that means for each particular case depends on what the interrupts are being responsible for - hard to tell without additional details.

    • cmnybo@discuss.tchncs.deEnglish
      44·
      5 days ago

      That’s a kernel worker for ACPI. It sounds like you may have a driver for something that is misbehaving.

    • henfredemars@infosec.pubEnglish
      22·
      5 days ago

      You can’t kill that because it’s a kernel thread. They are not like normal process; these objects are part of the operating system and terminating such a thread can cause in stability.

    • henfredemars@infosec.pubEnglish
      11·
      5 days ago

      To me it sounds like your root cause is either a driver problem or your hardware is misbehaving a little bit in a way the driver doesn’t expect, firing a lot of interrupts that shouldn’t normally happen.

      If this seems to resolve your issue, I wouldn’t lose any sleep over it. I would think my hardware is a little bit weird or there’s a bug somewhere in the driver for it. You can also try different kernel versions if your distribution gives you the option, because kernels come with different versions of drivers.