I’ve bought Pine64 products before (pinephone and recently the pinetime) but I’ve heard Zach Freedman (void star labs) mention this before and rave about it. I wanted to hear from the ergo community what they thought about it before I bought one to start my keyboard building journey.

In addition, if I should buy one, what tips do you recommend be purchased? It looks like I can buy long/short versions of fine/gross tips. What’s best for keyboard building? Here’s a link to their pinecil products.

  • nottheengineer@feddit.de
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    It’s a great little iron. Unfortunately it only comes with a pointy tip, which is fine for soldering switches directly to PCBs, but bad for everything else.

    You’ll definitely want a flat tip for SMD stuff. Too fine and it won’t work with hotswap sockets, so I’d go with the gross pack. Or any TS100 tips, those fit the pinecil too.

  • wolfwood@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    absolutely recommend. i use the fine bevel (cone truncated at an angle) and regular? chisel tips. i don’t really like rounded cone tips, not enough surface contact.

    do get the silicone usb cable, so you can solder with a (65W for full output) USB-C battery pack or charger.

    there are some great 3D printable carrying cases too.

    only caveat is the thing is so light, bumping the cable can knock it loose from a stand if its not enclosed.

    also, don’t listen to peeps who say they don’t even tighten the screw when swapping tips. really bad idea.

  • 𝕽𝖔𝖔𝖙𝖎𝖊𝖘𝖙@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    It’s a fantastic tool!

    The price is frankly almost unbelievable for the value you get

    I don’t really use my far more expensive soldering station anymore, the Pinecil works for everything I do and it runs off the same battery I use as a backup for my phone/laptop

  • nonagoninf@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    All the recent keyboard work I have done with the Pinecil and it’s great. I use both a pointed tip and a chisel tip. The pointed tip is nice for most PCB work, the chisel for things like hand wiring.

  • Hazel@keeb.lolM
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Put me down as a pinecil lover. These things are great. I had a TS100 before, and while it was very nice, the pinecil is superior

  • obosob@feddit.ukM
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I really love mine. It’s just a great little iron and really affordable. Highly recommend.

  • sevanteri@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Oh it is definitely a marvelous thing; I’m never getting another soldering iron. I also have the fine tips and they are great too.

  • drudoo@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    1
    ·
    1 year ago

    Is this just a rebranding of the TS-100? Looks exactly the same. I’ve been using a TS-100 for years and it’s amazing for keyboards. Not sure what tip I have.

    • obosob@feddit.ukM
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      No, it is a separate thing but heavily inspired by the ts100 and uses the same tips. More like an open-source clone rather than a “rebrand”.