I’ve got 20 of these to carve out, and I’ve only done a smidgen of carving before. Luckily my boss trusts me enough with his antique carving tools
Before I started carving:
I’ve got 20 of these to carve out, and I’ve only done a smidgen of carving before. Luckily my boss trusts me enough with his antique carving tools
Before I started carving:
What kind of tools do you use for something like this?
Not sure if you mean all of it, or just the carving part, but I used a 1" hole saw on a drill press in the small opening, and a 3" hole saw for the two larger rounds. Then spindle sand the edges. Then use a jig saw and chisel to clean up the small opening. Next is a router with a cove bit with a bearing. Then using a carving knife and carving gouge to get the shape. Hope that helps!